Alerón de fibra de carbono seco TESERY de alto rendimiento para Tesla Model 3 Highland / Model Y

A1 - Yes, our Tesla Model Y spoiler typically comes with 12 month warranty. Our warranty coverage including a standard warranty for a Tesla Model Y spoiler usually covers defects in materials and workmanship. This means that if the spoiler has issues like cracking, fading, or manufacturing defects within the warranty period, it can typically be replaced or refunded.

1. Our Carbon Pattern Warranty:
Our dry carbon fiber is hand laid and is not Prepreg Wet Molded.

**Introduction of dry carbon fiber**：Dry carbon fiber is not made in the same way as wet carbon fiber. The price of dry carbon fiber is more expensive, the production process is more complicated, the manufacturing cost is also higher. Carbon fiber is a material that is used in many high performance sports cars and racing cars. Carbon fiber can not be found in ordinary civilian cars. Dry Carbon Fiber is lightweight and strong, so it's only natural that this material is popular with many supercar manufacturers. Dry Carbon Fiber has less resin left over from the manufacturing process, which makes the parts made from this type of fiber stronger.

**Introduction of Wet Carbon Fiber**：Wet carbon fiber is much easier to make than dry carbon fiber, and the cost is vastly different. The mainstream production method of wet carbon fiber can be basically divided into two, one is the hand-layup method, the specific exploration can be literally understood. Will not be soaked in epoxy resin in advance of the carbon fiber cloth cut into the desired shape, first in the abrasive tool to brush the release agent, and then every layer of carbon fiber cloth will be brushed with a layer of epoxy resin as a binder until the completion of the wet broken fibers within the lower content of the tree wax, so that the production of carbon fiber caused by the cost of a fairly low. There are very many fake carbon fiber parts on the market, such carbon fiber parts with a layer of imitation carbon fiber stickers only.

2. Our UV Warranty:
Our carbon fiber spoiler is coated with 3 coats of UV Protection. Over time without proper care from waxing or applying a nano-ceramic coating, this protection can wear off. Slight yellowing is normal for carbon fiber when parked outside in direct sunlight and is not covered under our warranty. To extend the life of our Carbon Fiber, we recommend using "303 Protectant” that will assist with UV protection.

A2 - No, a properly installed Tesla Model Y spoiler should not easily come off. The spoiler is designed with strong, automotive-grade 3M adhesive tape that creates a secure bond with the vehicle's surface. However, the longevity of the attachment depends on proper installation.

To ensure the spoiler stays in place, it's important to:

- Clean the surface thoroughly before installation to remove any dirt, wax, or debris that could interfere with the adhesive.
- Apply the provided adhesive promoter to the surface, which enhances the bonding strength of the 3M tape.
- Press the spoiler firmly onto the vehicle after removing the backing from the adhesive, ensuring an even application of pressure for 20-30 seconds or longer.
- Allow time for curing: After installation, it's recommended to leave the spoiler undisturbed for at least 48 hours to allow the adhesive to fully bond and harden.

In case of any issues like lifting or edges coming off, it is likely due to improper installation, and re-aligning with the provided positioning stickers and re-applying the adhesive may help.

By following these steps, the spoiler should stay securely in place without easily coming off.

A3 - Yes, installing aftermarket spoilers is easy, our Tesla Model Y spoiler that are designed with user-friendly installation. It comes with everything you need, including extra 3M tape and positioning stickers to help ensure a secure and accurate fit. To make the installation even more reliable, we recommend using the included adhesive activator to ensure a strong bond between the spoiler and your vehicle. The process is straightforward, and with the proper tools, you can complete the installation without professional assistance.

Our carbon fiber spoiler use high-quality adhesive backing, which makes installation relatively simple. You just need to align the spoiler with the designated spots on your car’s trunk or rear hatch, peel off the adhesive backing, and firmly press the spoiler into place. Typically, this can be done in under half an hour with proper alignment. No drilling or modification of the car is needed.

As you can see in the tutorial below. It's a no-punch installation and is firmly mounted.

Installation Steps：
1. Clean the Surface: Ensure that the area where you will be installing the spoiler is clean and free of any dirt, wax, or debris. You can use a mild cleaning solution to clean the surface thoroughly. This ensures a better bond for the adhesive.

2. Mark the Placement: Before applying the spoiler, mark the exact placement using masking tape. This will serve as a guide during the installation. Additionally, use the provided positioning stickers to help you correctly align the spoiler in the desired position.

3. Test Fit: Before removing any adhesive backing, do a test fit of the spoiler to make sure it aligns properly with the markings and positioning stickers. Adjust as needed to ensure a perfect fit.

4. Apply Adhesive Promoter: Before peeling off the adhesive backing, apply the provided adhesive promoter to the surface where the 3M tape will make contact. This will enhance the adhesion, ensuring a stronger and more secure bond between the spoiler and the vehicle.

5. Peel Off Adhesive Backing: Once you're satisfied with the placement, start peeling off the adhesive backing gradually. Avoid touching the adhesive to prevent contamination. To achieve a stronger bond, we recommend gently heating the double-sided adhesive with a hair dryer or lighter (ensure the temperature does not exceed 40°C/104°F).

6. Press Firmly: Once the adhesive is exposed, press the spoiler firmly onto the surface. Apply even pressure across the entire surface to ensure a secure bond. Press for 20-30 seconds or more. It's recommended to let the surface stay dry for 48 hours for the best firming result.

7. Double-Check Alignment: After installation, double-check the alignment to ensure it meets your satisfaction. Make any final adjustments if needed before the adhesive fully sets.

Important Tips：
- Additional 3M Tape: If the provided 3M tape is not enough for the full installation, feel free to use the extra 3M tape included in the package to ensure a secure bond.
- Use Adhesive Promoter for Stronger Bonding: For a more secure attachment, we recommend pairing the provided adhesive promoter with the 3M tape to enhance the bond strength.
- Fixing Edges: If you experience any issues with the edges lifting or not adhering properly, it may be due to improper installation. Use the provided positioning stickers to adjust and ensure the spoiler is properly aligned and pressed firmly against the surface.

A4 - Installing a spoiler on your Tesla Model Y offers several advantages, both in terms of aesthetics and performance:

Improved Aerodynamics: A spoiler helps reduce drag by improving airflow over the vehicle, which can result in better fuel efficiency and range. It directs air away from the rear of the car, reducing turbulence and increasing stability at higher speeds.

Enhanced Vehicle Stability: At higher speeds, a spoiler generates additional downforce, helping to keep the car more stable and improve handling. This is especially beneficial for driving at highway speeds or during quick maneuvers.

Sporty Look: A spoiler adds a sleek, sporty appearance to the Tesla Model Y, giving it a more aggressive and modern aesthetic. It enhances the car’s design and gives it a more performance-oriented vibe.

Better Traction: By increasing downforce, the spoiler improves traction on the road, particularly during high-speed driving or tight turns. This can help improve cornering and overall vehicle control.

Potential for Increased Resale Value: Adding a high-quality, visually appealing accessory like a spoiler may enhance the resale value of your Tesla, as some buyers prefer vehicles with performance upgrades.

Customizable Options: Spoilers come in different designs and materials, including carbon fiber and other lightweight options, allowing you to choose the one that best suits your taste and driving needs.

Overall, installing a spoiler on your Tesla Model Y can offer both functional benefits and an upgraded aesthetic appeal, making it a popular modification for Tesla enthusiasts.

A5 - Maintaining and cleaning your Tesla Model Y spoiler is important to ensure it stays in top condition and continues to provide both aesthetic and aerodynamic benefits. Here are some tips to help you maintain and clean your spoiler effectively:

1. Regular Cleaning
Use Mild Soap and Water: To clean your Tesla Model Y spoiler, start by using a mild automotive soap mixed with water. Avoid harsh chemicals, as they may damage the finish of the spoiler or the adhesive.
Soft Cloth or Sponge: Use a soft microfiber cloth or a gentle sponge to wash the surface of the spoiler. Avoid using abrasive materials that can scratch or damage the surface.
Rinse and Dry: After cleaning, rinse off any soap residue and dry the spoiler with a soft towel to prevent water spots.

2. Avoid Harsh Chemicals
Avoid Strong Cleaners: Don’t use strong cleaners, waxes, or polishes on the spoiler, especially those that contain alcohol, acetone, or petroleum-based chemicals. These can damage the finish or weaken the adhesive bond.
Check for Residue: If you’ve used a wax or sealant on your car, make sure to wipe off any residue from the spoiler as some products can leave a buildup that dulls the carbon fiber or glossy finish.

3. Inspect the Spoiler
Check for Loose Edges: Periodically inspect the edges of the spoiler for any signs of peeling or lifting. If the adhesive starts to wear off, you may need to reapply adhesive or reposition it.
Reapply Adhesive if Needed: If you notice any part of the spoiler coming off, use the included adhesive or repositioning tape to secure it. Make sure to clean the surface thoroughly before doing so.

4. Protect the Spoiler
Park in a Shaded Area: To preserve the finish of your spoiler, try to park your Tesla in shaded areas or use a car cover when possible. Direct exposure to sunlight and UV rays can cause fading and wear over time.
Avoid Harsh Weather: Try to avoid driving in extreme weather conditions, especially in areas with heavy snow or ice, which can damage the spoiler. If needed, use a cover to protect it during bad weather.

5. Avoid High-Pressure Washers
No High-Pressure Water: Avoid using a high-pressure washer directly on the spoiler as it can force water underneath the adhesive and cause the spoiler to lift or detach.

By following these tips, you can help keep your Tesla Model Y spoiler looking great and functioning properly for a long time. Regular care and cleaning will ensure it continues to add both style and performance benefits to your vehicle.