Ensuring the air inside your Tesla Model 3 is as fresh as a breeze is a simple task with significant benefits for both your health and your car's HVAC system. The cabin filter, a crucial component in maintaining clean air, requires periodic replacement to continue performing at its best. Whether you're a do-it-yourself enthusiast or simply want to extend the life of your vehicle's interior air quality system, this guide will provide you with a step-by-step process for changing the cabin filter in your Tesla Model 3, making it easier than ever to keep your driving experience fresh and clean.
How to Change the Cabin Filter in Your Tesla Model 3?
- Step 1: Gather Necessary Tools Acquire a clip pry tool, a trim tool, and a T20 screwdriver.
- Step 2: Turn Off Climate Control Disable the climate control system before starting the replacement process.
- Step 3: Remove the Floor Mat Slide the front seat on the right-hand side fully rearward and remove the floor mat.
- Step 4: Detach the Front Footwell Cover Use a clip pry tool to release the push clips securing the cover, then disconnect the electrical connectors.
- Step 5: Release the Side Panel Carefully release the right side panel from the center console using a trim tool.
- Step 6: Remove the Cabin Filter Cover Remove the T20 screw or engage the locking tabs and lift off the cabin filter cover.
- Step 7: Extract Old Filters Pull out the old cabin filters from the HVAC module, ensuring not to damage any High Voltage (HV) cables
- Step 8: Install New Filters Place the new filters with arrows facing towards the rear of the vehicle and secure the cover back in place.
- Step 9: Reassemble the Components Reconnect the electrical connectors, reattach the side panel, and replace the floor mat.
Watch the vedio:
Replacing the cabin filter in your Tesla Model 3 is a straightforward process that contributes to the overall health and comfort of your vehicle's interior environment. By following these steps, you can ensure that the air you breathe while driving remains clean and fresh.
FAQ Section:
-
Q: How often should I replace the cabin filter in my Tesla Model 3? A: Tesla recommends replacing the cabin filter every two years, or annually in China
-
Q: Can I replace the cabin filter myself, or do I need a professional? A: You can replace the cabin filter yourself by following the provided steps, though a professional can also perform this service.
-
Q: Where can I purchase a replacement cabin filter for my Tesla Model 3? A: Replacement cabin filters can be purchased at the Tesla Shop or online through authorized retailers.
-
Q: Are there any safety precautions I should be aware of when replacing the cabin filter? A: Be cautious not to stretch, bend, or damage the orange High Voltage (HV) cables attached to the cabin filter cover
-
Q: What if I'm unsure about the type of screw or fastener for the cabin filter cover? A: The screw may be a T20 or a T20/6mm hybrid fastener, and in some vehicles, locking tabs may replace the screw .